Radius Configuration Commands - 3Com S7906E Command Reference Manual

2

RADIUS Configuration Commands

RADIUS Configuration Commands
data-flow-format (RADIUS scheme view)
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
View
RADIUS scheme view
Default Level
2: System level
Parameters
data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or gigabyte.
packet: Specifies the unit for data packets, which can be one-packet, kilo-packet, mega-packet, or
giga-packet.
Description
Use the data-flow-format command to specify the unit for data flows or packets to be sent to a RADIUS
server.
Use the undo data-flow-format command to restore the default.
By default, the unit for data flows is byte and that for data packets is one-packet.
Note that the specified unit of data flows sent to the RADIUS server must be consistent with the traffic
statistics unit of the RADIUS server. Otherwise, accounting cannot be performed correctly.
Related commands: display radius scheme.
Examples
# Define RADIUS scheme radius1 to send data flows and packets destined for the RADIUS server in
kilobytes and kilo-packets.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
2-1