3Com S7906E Command Reference Manual page 1760

Parameters
idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or enabled.
service-type: Specifies the local users of a type.
ftp refers to users using FTP;
lan-access refers to users accessing the network through an Ethernet, such as 802.1X users;
ssh refers to users using SSH;
telnet refers to users using Telnet;
terminal refers to users logging in through the console port, AUX port.
state { active | block }: Specifies all local users in the state of active or block. A local user in the state of
active can access network services, while a local user in the state of blocked cannot.
user-name user-name: Specifies all local users using the specified username. The username is a
case-sensitive string of 1 to 55 characters and does not contain the domain name.
vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to 4094.
slot slot-number: Specifies all local users in the slot where the interface card is inserted.
Description
Use the display local-user command to display information about specified or all local users.
Related commands: local-user.
Examples
# Display the information of local user bbb on the card installed on slot 1.
<Sysname> display local-user user-name bbb slot 0
Slot: 0
The contents of local user bbb:
State:
ServiceType:
Idle-cut:
Access-limit:
Bind location:
Vlan ID:
IP address:
MAC address:
FTP Directory:
User Privilege:
Total 1 local user(s) matched.
Table 1-3 display local-user command output description (for distributed device)
Slot
State
ServiceType
Idle-cut
Access-limit
Active
lan-access
Disable
Enable
Disable
Disable
Disable
Disable
flash:
0
Field
1-19
Current AccessNum: 100
Description
Slot number of the card
Status of the local user, active or block
Service types that the user can use, including ftp,
lan-access, ssh, telnet, and terminal.
Whether idle cut is enabled
Access user connection limit