3Com S7906E Command Reference Manual page 1770

Description
Use the state command to configure the status of the current ISP domain or local user.
By default, an ISP domain is active when created. So is a local user.
By blocking an ISP domain, you disable users of the domain that are offline from requesting network
services. Note that the online users are not affected.
By blocking a user, you disable the user from requesting network services. No other users are affected.
Related commands: domain.
Examples
# Place the current ISP domain aabbcc.net to the state of blocked.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] state block
# Place the current user user1 to the state of blocked.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-user-user1] state block
work-directory
Syntax
work-directory directory-name
undo work-directory
View
Local user view
Default Level
3: Manage level
Parameters
directory-name: Name of the directory that FTP/SFTP users are authorized to access, a
case-insensitive string of 1 to 135 characters.
Description
Use the work-directory command to specify the directory accessible to FTP/SFTP users.
Use the undo work-directory command to restore the default.
By default, FTP/SFTP users can access the root directory of the device.
Note that:
The specified directory accessible to users must exist.
If you use a file system command to delete the specified directory, FTP/SFTP users will no longer
access the directory.
1-29