Display Connection - 3Com S7906E Command Reference Manual

display connection

Syntax
display connection [ access-type { dot1x | mac-authentication | portal } | domain isp-name |
interface interface-type interface-number | ip ip-address | mac mac-address | ucibindex ucib-index |
user-name user-name | vlan vlan-id ] [ slot slot-number ]
View
Any view
Default Level
1: Monitor level
Parameters
access-type { dot1x | mac-authentication | portal }: Specifies user connections of an access mode,
that is, 802.1X user connections, MAC authentication user connections, or portal authentication user
connections.
domain isp-name: Specifies all user connections of an ISP domain. The isp-name argument refers to
the name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface interface-type interface-number: Specifies all user connections of an interface.
ip ip-address: Specifies all user connections using the specified IP address.
mac mac-address: Specifies all user connections using the specified MAC address. The MAC address
must be in the format of H-H-H.
ucibindex ucib-index: Specifies all user connections using the specified connection index. The value
range 0 to 4294967295.
user-name user-name: Specifies all user connections using the specified username. The user-name
argument is a case-sensitive string of 1 to 80 characters and must contain the domain name. If you
enter a username without any domain name, the system assumes that the default domain name is used
for the username.
vlan vlan-id: Specifies all user connections in a VLAN. The VLAN ID ranges from 1 to 4094.
slot slot-number: Specifies the connections on a slot.
Description
Use the display connection command to display information about specified or all AAA user
connections.
This command does not apply to FTP user connections.
Related commands: cut connection.
Examples
# Display information about all AAA user connections.
<Sysname> display connection
Index=1 ,Username=telnet@system
IP=10.0.0.1
Total 1 connection(s) matched.
1-16