Authorization Default - 3Com S7906E Command Reference Manual

Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
Description
Use the authorization command command to specify the authorization scheme for command line
users.
Use the undo authorization command command to restore the default.
By default, the default authorization scheme is used for command line users.
Note that the HWTACACS scheme specified for the current ISP domain must have been configured.
Related commands: authorization default, hwtacacs scheme.
Examples
# Configure the default ISP domain system to use HWTACACS authorization scheme hw for command
line users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization command hwtacacs-scheme hw

authorization default

Syntax
authorization default { hwtacacs-scheme hwtacacs-scheme-name [ local ] |
radius-scheme radius-scheme-name [ local ] }
undo authorization default
View
ISP domain view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform any authorization. In this case, an authenticated user is automatically
authorized with the corresponding default rights.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the authorization default command to specify the authorization scheme for all types of users.
Use the undo authorization default command to restore the default.
1-11
local | none |