Peer Sa-Cache-Maximum; Peer Sa-Policy - 3Com 5500-EI PWR Reference Manual

Examples
# Configure to send an SA request message to the MSDP peer 125.10.7.6.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 request-sa-enable

peer sa-cache-maximum

Syntax
peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
View
MSDP view
Parameters
peer-address: Specifies an MSDP peer by its IP address.
sa-limit: Maximum number of (S, G) entries that can be cached, ranging from 1 to 2,048.
Description
Use the peer sa-cache-maximum command to configure the maximum number of (S, G) entries
learned from the specified MSDP peer that the device can cache.
Use the undo peer sa-cache-maximum command to restore the default configuration.
By default, the device can cache a maximum of 2,048 (S, G) entries learned from an MSDP peer..
You are recommended to perform this configuration on all MSDP peers on a network that is vulnerable
to DoS attacks.
Related commands: display msdp sa-count, display msdp peer-status, display msdp brief.
Examples
# Allow the device to cache a maximum of 100 (S, G) entries learned from the MSDP peer with the
address of 125.10.7.6.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 sa-cache-maximum 100

peer sa-policy

Syntax
peer peer-address sa-policy { import | export } [ acl acl-number ]
undo peer peer-address sa-policy { import | export }
4-14