Water Pump Replacement; Water Pump Inspection Tu- I - Honda S2000 Service Manual

1 .
2 .
Water Pump Inspection
,1'
..:.'
4 .
5 .
Turn the water pump counterclockwise. Check that
it turns freely.
Check for signs of seal leakage. A small amount of
"weeping" from
the bleed hole (A) is normal.
Loosen the water pump pulley bolts.
fMove the auto-tensioner to remove tension from
the alternator-compressor belt, then remove the
alternator-compressor belt (see step 8 on page 6-
1 5 ) .
R e m o v e t h e w a t e r P u m P P u l l e Y .
6 x 1 . 0 m m
1 4 N . m
(1.4 kgf.m,
10 tbf.ft)
1 .
2 .
Water Pump Replacement
7 .
Loosen the water pump pulley bolts.
Move the auto-tensioner to remove tension from
the alternator-compressor belt. then remove the
alternator-compressor belt (see step 8 on page 6-
1 5 ) .
Remove the water pump pulley.
Remove the water pump (A) by removing the six
bolts,
1 0 x 1 . 2 5 m m
44 N m {4.5 kgf.m,33 lbt ftl
Clean and inspect the O-ring groove and the mating
surface with the thermostat housing.
I n s t a l l t h e w a t e r p u m p , w i t h a n e w O - r i n g { B } , i n t h e
reverse order of removal.
C l e a n u p t h e s p i l l e d e n g i n e c o o l a n l .
5 .
b .
1 ^ , i
Br
i, i',i
,,),;J
10-7