Atf Pump - Honda CR-V 1997 Service Manual

ATF Pump
Inspection
1, Install the ATF pump gears and ATF pump driven
gear shaft in the main valve body. Lubricate all
parts with ATF, and install the A TF pump driven
gear with its grooved and chamfered side facing up.
ATF PUMP DRIVE
GEAR
MAIN VAL VE BOOY
ATF PUMP DRIVEN GEAR
Groo ved and chamfered sid e
facing up
ATF PUMP DRIVEN
GEAR SHAFT
2. Measure the side clearance of the ATF pump drive
and driven gears.
ATF Pump Gears Side IRadial) Clearance:
Standard INew):
A TF Pump Drive Gear
0,105 - 0,1325 mm (0,004 - 0,005 in)
ATF Pump Driven Gear
0,035 - 0,0625 mm 10,0014 - 0,0025 in)
MAIN VALVE BODY
ATFPUMP
DRIVEN GEAR
ATFPUMP
DRIVE GEAR
Inspect teeth for wear and damage.
Inspect teeth for wear and damage .
3. Remove the ATF pump driven gear shaft. Measure
th e thrust clearance of the
ATF
pump driven gear-
to-valve body.
A TF Pump Drive/Driven Gear Thrust IAxial) Clearance:
Standard INew): 0,03 - 0,05 mm 10.001 - 0,002 in)
Service Limit: 0,07 mm 10,003 in)
ATFPUMP
DRIVEN GEAR
14-195