Install The Option On A Ga500 Drive - YASKAWA MECHATROLINK-II SI-T3 Technical Manual

Product Series
*3
GA500
*3
GA700
*3
GA800
*3
CR700
*3
CH700
Refer to "PRG" on the drive nameplate for the software version number.
*1
*2 Before you install the option on a YASKAWA AC Drive U1000 or Z1000U, make sure that the option software version is PRG: 6107
or later.
*3 Before you install the option on a YASKAWA AC Drive GA500, GA700, GA800, CR700, or CH700, make sure that the option
software version is PRG: 6108 or later.
Note:
• Refer to the option package labeling in the field designated "PRG" (four digit number)" or the option labeling in the field designated "C/
N (S + four digit number)" to identify the option software version.
• For Yaskawa customers in the North or South America region:
If your product is not listed in
provides a list of option manuals by product, and a direct link to download a PDF.
Scan QR code Or refer to: http://www.yaskawa.com/optionlookup
◆

Install the Option on a GA500 Drive

An option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kit
model is: JOHB-GA50. This kit is sold separately.
Refer to the option card mounting kit manual for more information about installation.
A - Option
B - Option card mounting kit
YASKAWA SIEP C730600 86F MECHATROLINK-II Technical Manual
Table 2.1, refer to the web page below to confirm this manual is correct for your product. The web page
components (sold separately)
Figure 2.1 Option Card Mounting Kit (JOHB-GA50)
Model (s)
CIPR-GA50xxxxx
CIPR-GA70xxxxx
CIPR-GA80xxxxx
CIPR-CR70xxxxx
CIPR-CH70xxxxx
C - Drive front cover
2 Overview
*1
Software Version
≥1010
≥1010
≥9010
≥1012
≥1012
7