Install The Option On A Ga500 Drive - YASKAWA SI-EP3 Technical Manual

Product Series
Z1000U
*2
GA500
*2
GA700
*2
GA800
*2
CR700
*2
CH700
*2
HV600
*1 Refer to "PRG" on the drive nameplate for the software version number.
*2 Before you install the option on a YASKAWA AC Drive GA500, GA700, GA800, CR700, CH700, or HV600, make sure that the
option software version is PRG: 4400 or later.
Note:
• Refer to the option package labeling in the field designated "PRG (four digit number)" or the option labeling in the field to identify the
option software version. Refer to
• For Yaskawa customers in the North or South America region:
If your product is not listed in
provides a list of option manuals by product, and a direct link to download a PDF.
Scan QR code Or refer to:
http://www.yaskawa.com/optionlookup
◆

Install the Option on a GA500 Drive

An option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kit
model is JOHB-GA50. This kit is sold separately.
Refer to the option card mounting kit manual for more information about installation.
YASKAWA SIEP C730600 89E PROFINET Technical Manual
CIMR-UxxFxxxx
CIMR-UxxRxxxx
CIMR-UxxSxxxx
CIMR-ZxxAxxxx
CIMR-ZxxExxxx
CIMR-ZxxPxxxx
CIMR-ZxxWxxxx
CIPR-GA50xxxxx
CIPR-GA70xxxxx
CIPR-GA80xxxxx
CIPR-CR70xxxxx
CIPR-CH70xxxxx
CIPR-HV60xxxxx
Figure 4.1 for more information.
Table 2.1, refer to the web page below to confirm this manual is correct for your product. The web page
Model(s)
2 Overview
*1
Software Version
≥ 6110
≥ 1010
≥ 1010
≥ 9010
≥ 1012
≥ 1012
≥ 1011
7