2
Ethernet cable to the corporate LAN
Connecting to the PBX
Connecting the NMS boards
An NMS board connects the server to the corporate telecommunications system. Skip this
procedure if the server is a Server Set Controller in a multi-server configuration. Server Set
Controllers do not use NMS boards.
1. If you are using a splitter cable with a CG6565 board, plug a splitter cable into each
2. Plug an Ethernet cable into each NMS-board or splitter-cable trunk connection.
NMS board connections
The graphic illustrates two E1 or T1 connections from an NMS CG6565 board to the corporate
telephone switching system.
1
Connection to corporate switch
2
Connection to corporate switch
Installing the Avaya S8800 Server for Avaya one-X Speech
trunk connector on the NMS board.
This is the server-side connection to the corporate telephone switching system. The
organization responsible for maintaining the corporate switch must make the
connection to the telecommunications system.
Connecting to the PBX
November 2009
23