Avaya DEFINITY Server CSI Maintenance Manual page 1910

Maintenance Objects
Port Audit and Update Test (#36)
This test sends port level translation data from switch processor to the UDS1
Interface circuit pack to ensure that the wideband access endpoint port's
translation is correct.
Table 576. TEST #36 Audit and Update Test
Error Test
Code Result
ABORT
1006 ABORT
2000 ABORT
2100 ABORT
FAIL
PASS
1910
Issue 5 October 2002
Description/ Recommendation
Internal System Error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
The port is out-of-service. If the port is busied out:
1. Issue release access-endpoint <extension> command to put the
port back into in-service.
2. Retry the test command.
If the port is not busied out:
1. Check the error and alarm logs for WAE-PORT and UDS1-BD errors
and alarms. Follow the recommended repair procedures.
Response to the test request was not received within the allowable time
period.
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Internal system error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Port translation has been updated successfully.
Continued on next page