Avaya DEFINITY Server CSI Maintenance Manual page 1877

VAL-BD (Voice Announcements over LAN Circuit Pack)
Maintenance Commands
The following table lists several VAL-related maintenance commands and how to
use the command for troubleshooting.
Table 559. VAL maintenance commands
Command
test board
test port
test mo
busyout board
release board
busyout port
release port
reset board
reset val
status data-module
status firmware download
list sys-link
status sys-link
status link
status val-ip
netstat ip-route
555-233-119
Use this command to
Test both circuit pack- and port-level maintenance.
Test any of the ports on the VAL circuit pack
Test either of the 2 maintenance objects on the VAL circuit
pack
Curtail activity on the circuit pack before resetting it (reset
board).
Resume activity on the circuit pack after busying out the VAL
circuit pack or ports on it (busyout board or busyout port).
Isolate a specific port usually during troubleshooting.
Resume activity after busying out a port on the VAL circuit
pack (busyout port).
Re-initialize the circuit pack in the system and upload
announcement file information.
Reset the circuit pack if it is in the insane state and to
override querying the board to determine if an
announcement autosave is in process.
Obtain general information about the data-module
connection to port 33 on the VAL circuit pack
Obtain information about a demand or scheduled firmware
download.
Generate a list of administered links and the general status
of each.
Generate a detailed status report for a specific administered
system link.
Generate a status report about a specific administered
ethernet link. (For VAL this means the administered ethernet
link.)
Generate an IP-related, MIB data status report.
Generate a report showing the status of the VAL IP routes on
the VAL circuit pack.
Continued on next page
Issue 5 October 2002
1877