Avaya DEFINITY Server CSI Maintenance Manual page 1878

Maintenance Objects
Table 559. VAL maintenance commands — Continued
Command
list directory board
remove file
enable filesystem
disable filesystem
set ethernet-options
get ethernet options
set boot-image
get boot-image
1878
Issue 5 October 2002
Use this command to
See the file contents of a VAL circuit pack by location.
Delete an announcement or firmware image file on a VAL
circuit pack.
Begin an FTP session into a specific TN2501AP circuit pack.
End an FTP session into a specific TN2501AP circuit pack.
Manually or automatically set the ethernet connection
parameters.
Generate a report about a specific ethernet connection.
Direct the system to use 1 of 2 possible firmware image files
on the TN2501AP circuit pack.
View the two firmware image parameters on the VAL circuit
pack.
Continued on next page