Avaya DEFINITY Server CSI Maintenance Manual page 1885

VC-BD
Error Log Entries and Test to Clear Values
Table 564. VC-BD Error Log Entries
Error Aux
Type Data
1
0 0
1 (a) Any
18 (b) 0
257 (c) Any
513 (d) 4352 to
4357
769 (e) 4358
1025 (f) 4363
1281 (g) Any
1293 to 46088
1294 (h) to
46096
1538 (i) 46082
1. Run the short test sequence first. If all tests pass, run the long test sequence. Refer to the appropriate
test description and follow the recommended procedures.
Notes:
a. The circuit pack stopped functioning or it was removed from the system.
This alarm is logged approximately 11 minutes after the circuit pack is
removed and/or the SAKI Sanity Test (#53) fails.
To resolve this error, insert a circuit pack in the same slot as the error
indicates, if the circuit pack is not already in the system. Or, if the circuit
pack is in the system and the red LED is on, then follow instructions for
Red alarms.
!
b. This circuit pack is busied out by the busyout board PCSS command.
555-233-119
Associated Test
Any
None
busyout board PCSS
Control Channel Loop
Test (#52)
NPE Audit Test (#50)
SAKI Sanity Test (#53)
SAKI Sanity Test (#53)
CAUTION:
If the TN788 Voice Conditioner Circuit Pack (VC-BD) is not Vintage 2
or later, it must be replaced.
Alarm On/Off
Level Board
Any Any test board PCSS sh r 1
MIN ON
WNG OFF release board PCSS
MIN ON test board PCSS r 20
MAJ ON
MIN ON See note (g)
MIN ON
Issue 5 October 2002
Test to Clear Value
Continued on next page
1885