Show Ip Route - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show ip route

show ip route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] [ all ] [ protocol ]
Syntax
[ filter ]
To display summary information:
show ip route summary [ vrf vrfName ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays current state of the routing table.
Description
Options
vrfName Displays the contents of the IP routing table associated with a VRF
destination Specifies the IP address or domain name of the host to show
ipMask IP mask of the specific address to show
detail Displays detailed information about the specific prefix; currently shows
the tag added by means of the ip route command
all Displays all routes in the routing table inserted from all protocols (not just
the best routes that are used for forwarding)
protocol One of the following protocols for which you want to display the best
routes in the routing table; no routes are displayed if routes for the specified
protocol are not present in the routing table
access Displays the best access-server routes (BGP) in the routing table
access-internal Displays the best access-internal routes in the routing table
bgp Displays the best BGP routes in the routing table
bgp-tunnel Displays the best BGP tunnel routes in the routing table
dvmrp Displays the best DVMRP routes in the routing table
isis Displays the best IS-IS routes in the routing table
ldp Displays the best LDP tunnel routes in the routing table
local Displays the best locally connected routes in the routing table
mbgp Displays the best MBGP routes in the routing table
ospf Displays the best OSPF routes owned by in the routing table
other Displays the best internal control routes in the routing table
rip Displays the best RIP routes in the routing table
rsvp Displays the best RSVP tunnel routes in the routing table
Chapter 7: S Commands
857
show ip route