Invert-Data - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

invert-data

invert-data;
Syntax
[edit interfaces e1-fpc/pic/port],
Hierarchy Level
[edit interfaces t1-fpc/pic/port],
[edit interfaces interface-name ds0-options],
[edit interfaces interface-name e1-options],
[edit interfaces interface-name t1-options],
[edit interfaces interface-name e3-options]
Statement introduced before JUNOS Release 7.4.
Release Information
Invert the transmission of unused data bits on the DS0, E1, E3, and T1 interface.
Description
NOTE: When configuring E1 or T1 interfaces on 10-port Channelized E1/T1 IQE PICs,
the
[edit interfaces t1-fpc/pic/port]
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1202
invert-data
statement must be included at the
invert-data
Configuring E1 Data Inversion on page 564
Configuring E3 Data Inversion on page 573
Configuring T1 Data Inversion on page 581
[edit interfaces e1-fpc/pic/port]
hierarchy level as appropriate.
or