Aaa Accounting Acct-Stop On-Aaa-Failure - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

aaa accounting acct-stop on-aaa-failure

aaa accounting acct-stop on-aaa-failure { enable | disable }
Syntax
no aaa accounting acct-stop on-aaa-failure
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures AAA to send an Acct-Stop message if a user fails AAA, but RADIUS grants
Description
access. The no version returns the parameter to the default of enable.
Options
Global Configuration
Mode
22
aaa accounting acct-stop on-aaa-failure
enable Specifies the feature; this is the default setting
disable Disables the feature