Baseline Mpls Interface - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

baseline mpls interface

baseline mpls interface interfaceName
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for the specified MPLS major interface or MPLS shim
Description
interface. By default, the interface counters are baselined at zero. There is no no
version.
Options
Privileged Exec
Mode
Related Topics
256
baseline mpls interface
interfaceName Name of interface; up to 15 alphanumeric characters
Setting Baselines for Layer 2 Services over MPLS in the JUNOSe BGP and MPLS
Configuration Guide