JunosE 11.2.x Command Reference Guide A to M
baseline mpls interface
Syntax
Release Information
Description
Options
Mode
Related Topics
254
baseline mpls interface interfaceName
Command introduced in JunosE Release 7.1.0.
Sets a statistics baseline for the specified MPLS major interface or MPLS shim interface.
By default, the interface counters are baselined at zero. There is no no version.
interfaceName—Name of interface; up to 15 alphanumeric characters
Privileged Exec
Setting Baselines for Layer 2 Services over MPLS in the JunosE BGP and MPLS
Configuration Guide
Copyright © 2010, Juniper Networks, Inc.