Configuring Custom Filters And Formats For Log Files (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide
Related
Documentation

Configuring Custom Filters and Formats for Log Files (NSM Procedure)

308
Table 90: Configuring Syslog Servers Details
Option Function
User Access / Admin Access / Sensors > Syslog Servers > Settings tab
Server name/IP Specifies the syslog server where you want
to store your log files (optional).
Facility Specifies the facility to map facilities on
your syslog server.
NOTE: The Secure Access device provides
eight facilities (LOCAL0- LOCAL7).
Filter Specifies the filter you want to apply to the
log file.
Configuring Custom Filters and Formats for Log Files (NSM Procedure) on page 308
Configuring Client-Side Logs (NSM Procedure) on page 310
To configure custom filters and formats for log files:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
custom filters and formats for log files.
Click the Configuration tab, and select System > Log/Monitoring > Filters. The
2.
corresponding workspace appears.
Add or modify settings as specified in Table 91 on page 308.
3.
Click one:
4.
OK—Saves the changes.
Cancel—Cancels the modification.
Table 91: Custom Filters and Formats for Log Files Configuration Details
Option Function
Filter Specifies the name of the filter.
Name
Start Date Specifies the start date in
which the Secure Access
device writes logs in the log file.
End Date Specifies the end date in which
the Secure Access device
writes logs in the log file.
Your Action
Enter the name or IP address
of the syslog server.
Select the facility from the
drop-down list.
Select the filter.
Your Action
Enter the name.
Enter the start date.
Enter the end date.
Copyright © 2010, Juniper Networks, Inc.