Baseline Dhcp - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
baseline dhcp
Syntax
Release Information
Description
Options
Mode
Related Topics
222
baseline dhcp { server | relay }
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for DHCP relay and DHCP relay proxy statistics. The router
implements the baseline by reading and storing the statistics at the time the baseline is
set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
server—Sets baseline for DHCP proxy server statistics
relay—Sets baseline for DHCP relay statistics
Privileged Exec
Setting Baselines for DHCP Statistics
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
