JUNOSe 11.1.x Broadband Access Configuration Guide
Setting Baselines for DHCP Statistics
You can use the baseline dhcp commands to set statistics baselines for DHCP
operations. The router implements the baseline by reading and storing the statistics
at the time the baseline is set and then subtracting this baseline when you retrieve
baseline-relative statistics.
Use the delta keyword with the show dhcp commands to display baselined statistics.
Tasks to set a baseline for DHCP statistics are:
1. Setting a Baseline for DHCP Relay and Relay Proxy on page 540
2. Setting a Baseline for DHCP Proxy Server Statistics on page 540
3. Setting a Baseline for DHCP External Server Statistics on page 541
4. Setting a Baseline for DHCP Local Server Statistics on page 541
Setting a Baseline for DHCP Relay and Relay Proxy
To set a statistics baseline for DHCP relay and DHCP relay proxy: :
There is no no version.
Setting a Baseline for DHCP Proxy Server Statistics
To set a baseline for DHCP proxy server statistics.
There is no no version.
540
Setting Baselines for DHCP Statistics
Monitoring DHCPv6 Local Server DNS Servers on page 575
Monitoring DHCPv6 Local Server Prefix Lifetime on page 575
Monitoring DHCPv6 Local Server Statistics on page 576
Monitoring Duplicate MAC Addresses Use By DHCP Local Server
Clients on page 577
Monitoring the Maximum Number of Available Leases on page 578
Monitoring Static IP Address and MAC Address Pairs Supplied by DHCP Local
Server on page 579
Monitoring Status of DHCP Applications on page 580
Issue the baseline dhcp relay command:
host1#baseline dhcp relay
Issue the baseline dhcp server command:
host1#baseline dhcp server