Atm Oam Flush - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

atm oam flush

[ no ] atm oam flush [ alarm-cells ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the router to ignore all OAM cells received on an ATM interface, and to
Description
stop sending OAM cells on this interface. OAM performs fault management and
performance management functions on an ATM interface. The no version disables
OAM flush on the interface.
Options
Interface Configuration
Mode
178
atm oam flush
alarm-cells Causes the router to ignore only AIS and RDI cells and to accept all
other OAM cells