Viewing Memory Utilization; Media Flow Controller System Configuration Overview - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide

Viewing Memory Utilization

Purpose
A last-day graph of Memory Utilization plus a pie chart of Current Memory Statistics
including statistics of Physical and Swap memory (Total, Used, and Free).
Action
•
From the left navigation pane in the Monitoring tab, click Memory.
The Memory Utilization (Last Day) page is displayed.
•
Use Pause and Resume buttons to stop/start graph charting.

Media Flow Controller System Configuration Overview

You can configure many system settings for the Juniper Networks Media Flow Controller by
using the System Config tab.
To configure system settings:
•
"Configuring Interfaces, Default Gateway, Static Routes, DNS and Domain Names,
Hostname and Banners (Web Interface)" on page 119
•
"Configuring Static Hosts and ARP (Web Interface)" on page 129
•
"Configuring Date, Time, and NTP (Web Interface)" on page 131
•
"Configuring Users and AAA (Web Interface)" on page 139
•
"Configuring SNMP, Faults, and Logging (Web Interface)" on page 143
Configuring Interfaces, Default Gateway, Static Routes, DNS
and Domain Names, Hostname and Banners (Web Interface)
Before you configure Media Flow Controller interfaces, see
Controller" on page
Tip! You may want to change the Web default logout time (900 = 15 minutes); to do this:
•
Click the System Config tab.
The Network Interfaces page is displayed.
Configuring Interfaces (Web Interface)
We recommend using eth0 for management, eth1 for origin fetch, and the other interfaces for
traffic. See
You can also configure the DHCP primary interface and add interface aliases on this page.
To view and set network interfaces:
•
From the left navigation pane in the System Config tab, select Interfaces.
The Network Interfaces page is displayed. See
58.
"Example: Media Flow Controller Interface Configuration" on page 63,"
Media Flow Controller Configuration Tasks (Web Interface)
"Before You Configure Media Flow
Figure
Media Flow Controller System Configuration Overview
12.
for details.
119