CMM Commands
copy flash-synchro
Copies the certified directory version of the primary CMM software to the certified directory of the
secondary CMM.
copy flash-synchro
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command is used to synchronize the certified directories of the primary and secondary CMMs.
The two CMMs must be synchronized if a fail over occurs, otherwise switch performance is affected.
Examples
-> copy flash-synchro
-> configure copy flash-synchro
Release History
Release 7.1.1; command introduced.
Related Commands
copy running certified
MIB Objects
chasControlModuleTable
chasControlVersionMngt
OmniSwitch CLI Reference Guide
Copies the RUNNING DIRECTORY configuration to the certified
directory on the primary CMM.
March 2011
copy flash-synchro
page 37-15