Display Isis Peer; Display Isis Route - 3Com 8807 Command Reference Manual

[3Com-Vlan-interface10] isis mesh-group 100
[SW8800] interface Vlan-interface 20
[3Com-Vlan-interface20] isis mesh-group 100
# Display the information of IS-IS mesh-group.
[3Com-Vlan-interface20] display isis mesh-group
Interface
Vlan-interface 10
Vlan-interface 20

display isis peer

Syntax
display isis peer [ verbose ]
View
Any view
Parameter
verbose: When this parameter is configured, the area address carried in the Hello
packet from the neighbor will be displayed. Otherwise, only the universal
information will be displayed.
Description
Use the display isis peer command to view IS-IS peer information.
The display isis peer verbose command yields not only all the outputs of the
display isis peer command, but also the area address, Uptime and IP address of
the directly connected interface of the peer.
Example
# Display detailed information about IS-IS neighbors.
<SW8800> display isis peer verbose
System ID
0002.0000.0000 Vlan-interface251
192.9.1.3
System ID
0003.0000.0000 Vlan-interface251
# View IS-IS peer Information.
<SW8800> display isis peer
System ID
0002.0000.0000 Vlan-interface251
0003.0000.0000 Vlan-interface251

display isis route

Syntax
display isis route
Mesh-group/Blocked
Interface
Area Address: 00.0001
IP Address: 192.3.1.3
192.10.1.3 192.11.1.3
Period: 22:27:42
Interface
Area Address: 00.0001
IP Address: 192.3.1.2
Period: 22:31:18
Interface
Integrated IS-IS Configuration Commands
100
100
Circuit ID
0002.0000.0000.0a Up
192.4.1.3 192.5.1.3 192.6.1.3
Circuit ID
0002.0000.0000.0a Up
Circuit ID
0002.0000.0000.0a Up
0002.0000.0000.0a Up
State HoldTime Type
6s L1
192.7.1.3 192.8.1.3
State HoldTime Type
22s L1
State HoldTime Type Pri
6s L1
22s L1
467
Pri
64
Pri
64
64
64