display onuinfo silent
Syntax
display onuinfo silent { interface interface-type interface-number | slot slot-number }
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type, which can be OLT.
interface-number: OLT port number.
slot-number: ID of the slot where the EPON card is seated.
Description
Use the display onuinfo silent command to display the information about all the silent ONUs
connected to the specified OLT port or to the EPON card seated in the specified slot.
Examples
# Display the information about all the silent ONUs connected to the EPON card seated in slot 4.
<Sysname> display onuinfo silent slot 4
-------------------------------- Olt4/0/1 ------------------------------
ONU Mac Address LLID Dist(M)
000f-e276-4b90
-------------------------------- Olt4/0/2 ------------------------------
ONU Mac Address LLID Dist(M)
000f-e276-4b91
-------------------------------- Olt4/0/3 ------------------------------
Error: The port's state should be up!
-------------------------------- Olt4/0/4 ------------------------------
ONU Mac Address LLID Dist(M)
000f-e276-4b93
---
3 entries found
# Display the information about all the silent ONUs connected to OLT 4/0/1.
<sysname> display onuinfo silent interface Olt 4/0/1
ONU Mac Address LLID Dist(M)
000f-e276-4b90
---
1 entry found
For the command output description, refer to
Port
0
N/A
N/A
Port
0
N/A
N/A
Port
0
N/A
N/A
---
Port
0
N/A
N/A
---
Table
1-16
Board/Ver
Sft/Epm
N/A
N/A
Board/Ver
Sft/Epm
N/A
N/A
Board/Ver
Sft/Epm
N/A
N/A
Board/Ver
Sft/Epm
N/A
N/A
1-10.
State
Aging
Silent
266s
State
Aging
Silent
252s
State
Aging
Silent
300s
State
Aging
Silent
243s