Group Member - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
None
Description
Use the grant-filtering enable command to enable the grant filtering function on the OLT port.
Use the undo grant-filtering enable command to disable the grant filtering function on the OLT port.
By default, this function is enabled.
Examples
# Enable grant filtering on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] grant-filtering enable

group member

Syntax
group member interface-type interface-number
undo group member interface-type interface-number
View
Fiber backup group view
Default Level
2: System level
Parameters
interface-type: Port type. It is OLT
interface-number: OLT port number.
Description
Use the group member command to add an OLT port to a fiber backup group (the group must exist).
Use the undo group member command to remove an OLT port from a fiber backup group.
Related commands: fiber-backup group.
Examples
# In fiber backup group view, add OLT 3/0/1 to fiber backup group 1.
<Sysname> system-view
[Sysname] ftth
[Sysname-ftth] fiber-backup group 1
Create group ID successfully.
[Sysname-fiber-group1] group member olt3/0/1
1-22