Keypad Operation - YASKAWA CIMR-LC2A0018 Quick Start Manual

4 Keypad Operation

4 Keypad Operation
Digital Operator and Keys
The digital operator is used to program the drive, to start and stop it, and to display
fault information. The LEDs indicate the operating status of the drive.
Keys and Functions
Key
F1
F2
ESC
RESET
RUN
STOP
ENTER
LO
RE
ALM
16
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
Name
Function Key The functions assigned to F1 and F2 vary depending on the menu that is currently displayed. The
(F1, F2) name of each function appears in the lower half of the display window.
• Returns to the previous display.
ESC Key • Moves the cursor one space to the left.
• Pressing and holding this button will return to the Speed Reference display.
• Moves the cursor to the right.
RESET Key
• Resets the drive to clear a fault situation.
Starts the drive in the LOCAL mode.
The Run LED
• is on, when the drive is operating the motor.
RUN Key
• flashes when decelerating to stop ("ramp to stop"), or when the speed reference is 0.
• flashes quickly when the drive is disabled by a DI, when the drive was stopped using a Fast Stop
command via the digital inputs, or when a Run command is active during power up.
Up Arrow Key Scrolls up to display the next item, selects parameter numbers and increments setting values.
Down Arrow Key Scrolls down to display the next item, selects parameter numbers and increments setting values.
STOP Key Stops drive operation.
• Enters parameter values and settings.
ENTER Key
• Selects a menu item to move between displays.
LO/RE Selection Switches drive control between the operator (LOCAL) and the control circuit terminals
Key (REMOTE). The LED is on when the drive is in the LOCAL mode (operation from keypad).
On: When the drive detects a fault.
Flashing:
ALM LED Light • When an alarm occurs.
• When oPE is detected.
• When a fault or error occurs during Auto-Tuning.
Function
YASKAWA ELECTRIC TOEP C710616 33A YASKAWA AC Drive L1000A Quick Start Guide
ALM
DIGITAL OPERATOR JVOP-180
F1 F2
LO
ESC
RE
RESET ENTER
RUN STOP