Avaya S8700 Maintenance Manual page 334

Maintenance Commands
Output (Page 2)
The following example shows the output from page 2 of the change
system-parameters maintenance command.
change system-parameters maintenance
MINIMUM MAINTENANCE THRESHOLDS ( Before Notification )
TTRs: 4
MMIs: 0
TERMINATING TRUNK TRANSMISSION TEST ( Extension )
Test Type 100:
ISDN MAINTENANCE
ISDN-PRI Test Call Extension:
DS1 MAINTENANCE
DS0 Loop-Around Test Call Extension:
Field Descriptions (Page 2)
Start
Date/Time
Stop Date/Time
Target
Location
7-78 Issue 1 May 2002
MAINTENANCE-RELATED SYSTEM PARAMETERS
CPTRs: 1 Call Classifier Ports: 0
VCs: 0
Test Type 102:
This field only appears if the
date portion of the field is formatted: mm/dd/yyyy (mm=2 digits for the
month, dd=2 digits for the day and yyyy = 4 digits for the year). The time
portion of the field is formatted: hh:mm (hh=2 digits for the hour and mm =
2 digits for the minutes).
This field only appears if the
The date portion of the field is formatted: mm/dd/yyyy (mm=2 digits for the
month, dd=2 digits for the day and yyyy = 4 digits for the year). The time
portion of the field is formatted: hh:mm (hh=2 digits for the hour and mm =
2 digits for the minutes). If this field is left blank, the download will continue
until completion.
These fields contain the target board locations (ppcss) of the boards that
will receive the download file image.
Test Type 105:
ISDN-BRI Service SPID:
Schedule Download
Schedule Download
Continued on next page
Page 2 of 3
field is set to y. The
field is set to "y".
555-233-143