Avaya S8700 Maintenance Manual page 344

Maintenance Commands
Defaults
Every alarm will be displayed.
Parameters
print This will cause the report to be printed if a printer is linked to the SAT.
schedule When the "schedule" option is specified, the command is validated and then a
scheduling form is displayed to allow the technician to schedule execution of the
command. The command is then placed in the command queue and is executed at the
specified time. The information displayed by the command is sent to the system printer
instead of the screen. Refer to the Report Scheduler and System Printer feature
specification [4] for more details.
When no parameters entered on the command line, parameters are selected on the
Hardware Alarm Report form instead.
Error Messages
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If every available maintenance resource is currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
Form Input
After entering the command display alarms, the system technician will be
presented with an options form:
Alarm Types
Interval
From
7-88 Issue 1 May 2002
The type of alarm to be displayed is specified by placing a "y" or "n" in the
alarm type fields. The technician can choose a combination of active
alarms, major, minor, warning, or resolved alarms.
Display alarm records for the last (m)onth, last (h)our, last (d)ay, last
(w)eek, or (a)ll. The default is all.
Display alarm records from the time specified by mm/dd/hh/mm, where mm
is the month, dd is the day, hh is the hour and mm is the minute. If no
"from" date is entered, then no checking is done. This will give the user
every alarm active since a month prior to the current time.
555-233-143