Avaya S8700 Maintenance Manual page 345

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

display alarms
To
Equipment Type
display alarms
The following options control which alarms will be displayed.
ALARM TYPES
REPORT PERIOD
EQUIPMENT TYPE ( Choose only one, if any, of the following )
Trunk ( group/member ):
555-233-143
Display alarm record to the time specified by mm/dd/hh/mm, where mm is
the month, dd is the day, hh is the hour and mm is the minute. If no "to"
date is entered, any alarm which is active after the from date will be
selected.
The technician can choose between seven different equipment types. If
there is no input to any of these fields, the system will default to every type.
The user can select one of the following fields:
Cabinet: This allows the technician to display every alarm associated
with a particular cabinet. Alarms for a cabinet are referenced by a
number ranging from 1 to 3 which is assigned during cabinet
administration.
Port Network: This allows the technician to display every alarm
associated with a particular port network. Alarms for a port network
are referenced by a number ranging from 1 to 3.
Board Number: This allows the technician to display every alarm
associated with a particular circuit pack. Alarms for a
(cabinet-carrier-slot). If the cabinet number is omitted, the system will
default to 1.
Port: This allows the technician to display every alarm associated with
a particular port on a circuit pack. Alarms for a port circuit are
referenced by port location (cabinet-carrier-slot-circuit). If the cabinet
number is omitted, the system will default to 1.
Category: Alarms for a particular equipment category.
Extension: Alarms associated with an extension number.
Trunk (group/member): The technician can display every alarm
associated with a particular trunk group or trunk-group member. The
group identifier should be entered to view every alarm associated with
a trunk group
XXX/___. The group identifier and member identifier should both be
entered to view every alarm associated with a specific trunk-group
member XXX/XXX.
ALARM REPORTS
Active? y_
Resolved? n_
Major? y_
Minor? y_
Interval:
m_
From:
Cabinet:
Port Network:
Board Number:
Port:
Category:
Extension:
Warning? y_
__/__/__:__
To:
__/__/__:__
____
__
_______
________
________
_____
___/___
Issue 1 May 2002
Page 1 of 1
7-89

Advertisement

Table of Contents
loading

Table of Contents