Configure Rmon Event; Configure Rmon History - Avaya 2330 Reference Manual

configure rmon event

Use this command to configure an RMON event which can be associated with the RMON
alarms.
The maximum number of events is 100, and the maximum number of logs per event is also
100.
Syntax
[no] rmon event <1-65535> <type> [community <community>] [description
<description>] [owner <owner>]
Table 138: Variable definitions
Variable
<1-65535>
<type>
[community <community>]
[description <description>]
[owner <owner>]
Example
AG/configure# rmon event 2 log description "event 2" owner Manager-2

configure rmon history

To collect the Ethernet history statistics, use this command after enabling RMON .
The maximum number of history controls per interface is 10. The maximum number of history
buckets per control is 100.
Syntax
[no] history <ethernet_interface> [interval <interval>] [buckets
<buckets>] [owner <owner>]
Table 139: Variable definitions
Variable
<ethernet_interface>
Command Line Reference
Specifies the index number for the event entry.
Specifies the type of event: log, trap, or log-trap.
Specifies the community for sending traps.
Specifies a description about the event.
Specifies the owner of the event.
Specifies the Ethernet interface on which to collect history
statistics.
configure rmon event
Value
Value
August 2013 153