Dhcp And Bootp Relay - Avaya G450 Cli Reference Manual

Table 21: Device status commands (continued)
Command
show temp
show timeout
show upload
show utilization
show voltages
test led

DHCP and BOOTP relay

Table 22: DHCP and BOOTP relay CLI commands
Root level command
interface
{FastEthernet|
VLAN}
see
IP interface
configuration
ip bootp-dhcp
relay
Description
Display the device temperature
Display the amount of time in minutes the terminal
remains idle before timing out
Display the status of the current file copy process from
the device
Display information about CPU and memory usage on
the G450
Display power supply voltages
Test the system ALM, MDM and CPU LEDs on the front
panel of the G450
First level command
ip bootp-dhcp
network
ip bootp-dhcp
server
Description
Enter configuration mode for the FastEthernet or
VLAN interface
Select the network from which the BOOTP/DHCP
server should allocate an address
Add or remove a BOOTP/DHCP server to handle
BOOTP/DHCP requests received by the current
interface
Enable or disable relaying of BOOTP and DHCP
requests to the BOOTP/DHCP server
2 of 2
Issue 1 January 2008 57