Configure Snmp-Server Enable Traps Config; Configure Snmp-Server Enable Traps Environment - Avaya 2330 Reference Manual

SNMP commands
Syntax
contact <"contact-name">
Table 119: Variable definitions
<"contact-name">
Example
AG/configure/snmp-server# contact "JCameron"

configure snmp-server enable traps config

Use this command to enable or disable traps for configuration changes and saves.
Syntax
[no] config [trap_change change] [trap_save save]
Table 120: Variable definitions
[trap_change change]
[trap_save save]
Example
AG/configure/snmp-server/enable/traps# config trap_change change

configure snmp-server enable traps environment

Use this command to enable or disable traps for fan failure or temperature level changes.
Syntax
[no] environment [trap_fan fan] [trap_temp temperature] [trap_power
power]
Table 121: Variable definitions
[trap_fan fan]
134 Command Line Reference
Variable
Variable
Variable
Comments? infodev@avaya.com
Value
Name of the person to contact regarding the
SNMP MIB, enclosed in quotation marks.
Value
Enables the configuration trap.
Enables the save trap.
Value
Enables fan failure trap.
August 2013