Disable - Dell MXL 10GbE Reference Manual

disable

Disable the DHCP server.
Syntax
disable
DHCP Server is disabled by default. To enable the system to be a DHCP server, use
the no disable command.
Defaults Disabled
Command DHCP
Modes
Command
Version 8.3.16.1
History
dns-server
Assign a DNS server to clients based on address pool.
Syntax
dns-server address [address2...address8]
Parameters
address
Defaults none
Command DHCP <POOL>
Modes
Command
Version 8.3.16.1
History
domain-name
Assign a domain to clients based on the address pool.
Syntax
domain-name name
Parameters
name
Defaults none
Command DHCP <POOL>
Modes
486
Introduced on the MXL 10/40GbE Switch IO Module.
Enter a list of DNS servers that may service clients on the
subnet. You may list up to eight servers, in order of
preference.
Introduced on the MXL 10/40GbE Switch IO Module.
Give a name to the group of addresses in a pool.
Dynamic Host Configuration Protocol (DHCP)