Buffer-Profile (Configuration) - Dell MXL 10GbE Reference Manual

buffer-profile (Configuration)

Create a buffer profile that can be applied to an interface.
Syntax
buffer-profile {fp | csf] profile-name {global {1Q | | 4q}
Parameters
fp
csf
profile-name
global
1Q
4Q
Defaults Dynamic
Command CONFIGURATION
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage
The buffer-profile global command fails if you have already applied a
Information
custom buffer-profile on an interface. Similarly, when you configure buffer-
profile global, you cannot not apply buffer-profile on any interface.
If the default buffer-profile is active, the Dell OS displays an error message
instructing you to remove the default configuration using the no buffer-
profile global command.
Reload the system for the global buffer-profile to take effect.
Related
buffer (Buffer Profile)
Commands
buffer space, or packet pointers to queues from 0 to 3.
Debugging and Diagnostics
Enter the keyword fp to create a buffer profile for the Field
Processor.
Enter the keyword csf to create a buffer profile for the
Switch Fabric Processor.
Create a name for the buffer profile,
Apply one of two pre-defined buffer profiles to all of the
port-pipes in the system.
Enter the keyword 1Q to choose a pre-defined buffer profile
for single queue (for example, non-QoS) applications.
Enter the keyword 4q to choose a pre-defined buffer profile
for four queue (for example, QoS) applications.
Changed the default value from global 4Q to Dynamic.
Introduced on the MXL 10/40GbE Switch IO Module.
— allocates an amount of dedicated buffer space, dynamic
469