Show Hardware Layer3 - Dell MXL 10GbE Reference Manual

show hardware layer3

Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit 0–5 port-set 0–0
Parameters
acl | qos
stack-unit 0–5
port-set 0–0
Defaults none
Command EXEC Privilege
Modes
Command
Version 8.3.16.1
History
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
Syntax
show hardware stack-unit 0-5 {buffer [buffer unit | port
[(1-56) | all] total buffer | buffer unit (1) port (1-56) queue
[(0-14) | a11] buffer-info} {phy-firmware-version} {cpu data-
plane statistics [stack-port 0-52] | cpu party-bus statistics |
cpu private-mgmt statistics | drops [unit 0-1 [port 1-56]] |
stack-port 33-56 | unit 0-0 {counters | details | port-stats
[detail] | register}}
Parameters
stack-unit 0–5
{command-
option}
buffer
474
Enter either the keyword acl or the keyword qos to select
between ACL or QoS data.
Enter the keywords stack-unit then a numeral from 0 to 5
to select a stack ID.
Enter the keyword port-set with a port-pipe number.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the keywords stack-unit then 0 to 5 to select a
particular stack member and then enter one of the following
command options to display a collection of data based on
the option entered.
Enter the keyword buffer. To display the total buffer
statistics for the stack unit, enter the keyword total-
buffer. Enter the keywords buffer unit then total-
buffer to display the buffer details per unit and mode of
allocation. To display the forwarding plane statistics
containing the packet buffer usage per port per stack unit,
enter the keywords buffer unit then port and the port
number (1-56 or all), then buffer-info. To display the
forwarding plane statistics containing the packet buffer
statistics per COS per port, enter the keywords buffer
Debugging and Diagnostics