Dell MXL 10GbE Reference Manual page 461

Switch i/o module
Table of Contents

Advertisement

shared-
threshold-
weight
size
Default
The default size of the ingress buffer is 45 KB. The default buffer limit at which the
port sends the pause to peer and recommences the sending of packets to the peer
is 10 KB. The default threshold weight of the shared buffer space is 10.
Command
DCB-BUFFER-THRESHOLD mode
Modes
Command
Version 9.3(0.0)
History
Usage
You must apply this buffer policy at the interface level for the attributes to be
Information
applicable in conjunction with the DCB input policy.
For each QoS policy buffer, you can specify the shared buffer threshold limit, the
ingress buffer size, buffer limit for pausing the acceptance of packets, and the
buffer offset limit for resuming the acceptance of received packets. When PFC
detects congestion on a queue for a specified priority, it sends a pause frame for
the 802.1p priority traffic to the transmitting device.
You can use set up both the administrative and peer-related PFC priorities. For
example, you can configure the intended buffer configuration for all 8 priorities. If
you configure the number of lossless queues as 4 and if the administrator-
configured priorities configured within the DCB input policy is applied, then the
configuration for those priorities are pre-designed. However, if the peer-provided
priorities are applied, although a DCB input policy is present, the peer-provided
priorities become effective for buffer configuration. This method of configuration
provides an easy and flexible technique to accommodate both administratively-
configured and peer-configured priorities.
Example
Dell(conf)# qos-policy-buffer test
Dell (conf-qos-policy-buffer)#queue 0 pause no-drop buffer-size
128000 pause-threshold 103360 resume-threshold 83520
Dell(conf-qos-policy-buffer)# queue 4 pause no-drop buffer-size
128000 pause-threshold 103360 resume-threshold 83520
Data Center Bridging (DCB)
Buffer shared threshold weight
Weightage of the priorities on the shared buffer size in the
system. Enter a number in the range from 0 to 9. The default
shared threshold weight is 10.
Introduced on the MXL platform.
461

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxl 40gbe

Table of Contents