Ip Ospf Network; Ip Ospf Priority - Dell Force10 S4810P Reference Manual

ip ospf network

Set the network type for the interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ospf network {broadcast | point-to-point}
To return to the default, use the no ip ospf network command.
Parameters
broadcast
point-to-point
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1

ip ospf priority

Set the priority of the interface to determine the designated router for the OSPF network.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters
number
Defaults 1
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Enter the keyword broadcast to designate the interface as part of
a broadcast network.
Enter the keywords point-to-point to designate the interface
as part of a point-to-point network.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a number as the priority. The range is 0 to 255. The default is 1.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
1167