Ip Ospf Priority - Dell S6100 Configuration Manual

ip ospf priority

To determine the designated router for the OSPF network, set the priority of the interface.
Syntax ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters
number
Defaults 1
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre- 6.1.1.1
Usage Information
Setting a priority of 0 makes the router ineligible for election as a designated router or backup designated router.
Use this command for interfaces connected to multi-access networks, not point-to-point networks.
Enter a number as the priority. The range is from 0 to 255. The default is 1.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1097