Dcb-Policy Buffer-Threshold (Global Configuration) - Dell MXL 10GbE Reference Manual

to be allocated for each priority and the pause or resume thresholds for the buffer.
This method of configuration enables you to effectively manage and administer the
behavior of lossless queues.
Example
Dell(conf-if-te-0/0)#dcb-policy buffer-threshold test

dcb-policy buffer-threshold (Global Configuration)

Assign the DCB policy to the DCB buffer threshold profile on stack ports that applies globally throughout
the system.
Syntax
dcb-policy buffer-threshold stack-unit all stack-ports all
profile-name
Parameters
dcb-buffer-
threshold
profile-name
stack-unit all
stack-port all
Default None
Command CONFIGURATION mode
Modes
Command
Version 9.3(0.0)
History
Usage You can configure up to a maximum of four lossless (PFC) queues. By configuring
Information four lossless queues, you can configure four different priorities and assign a
particular priority to each application that your network is used to process. For
example, you can assign a higher priority for time-sensitive applications and a
lower priority for other services, such as file transfers. You can configure the
amount of buffer space to be allocated for each priority and the pause or resume
thresholds for the buffer. This method of configuration enables you to effectively
manage and administer the behavior of lossless queues.
Example
Dell(conf)# dcb-policy buffer-threshold stack-unit all stack-
ports all test
Data Center Bridging (DCB)
Configure the profile name for the DCB buffer threshold.
Enter the name of the profile, which can be a string of up to
32 characters in length.
Enter the stack unit identification. Indicates the specific the
stack unit or units. Entering all shows the status for all stacks.
Enter the port number of a port in a switch stack.
Introduced on the MXL platform.
457