Show Qos Dcb-Output - Dell MXL 10GbE Reference Manual

Usage
Information
Example
Dell(conf)# show qos dcb-input
dcb-input pfc-profile
dcb-input pfc-profile1

show qos dcb-output

Displays the ETS configuration in a DCB output policy.
Syntax
show qos dcb-output [ets-profile]
Parameters
[ets-profile]
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage
Information
Example
Dell# show qos dcb-output
dcb-output ets
Data Center Bridging (DCB)
NOTE: Please note that Dell Networking does not recommended to use this
command as it has been deprecated in the current 9.4(0.0) release. A warning
message appears when you try to run this command indicating that you have
to use the dcb-map commands in the future.
pfc link-delay 32
pfc priority 0-1
no pfc mode on
pfc priority 6-7
Enter the ETS profile.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: Please note that Dell Networking does not recommended to use this
command as it has been deprecated in the current 9.4(0.0) release. A warning
message appears when you try to run this command indicating that you have
to use the dcb-map commands in the future.
priority-group san qos-policy san
priority-group ipc qos-policy ipc
priority-group lan qos-policy lan
451