Table 52: Show Interfaces Lag Members Output Fields; Monitoring The Qos Configuration Of Ieee 802.3Ad Link Aggregation Group Bundles - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

For e series broadband services routers - quality of service configuration
Table of Contents

Advertisement

Monitoring the QoS Configuration of IEEE 802.3ad Link Aggregation Group Bundles

Display information about the QoS configuration for Ethernet member links in all
Purpose
IEEE 802.3ad link aggregation group (LAG) bundles configured on the router, or about
the member links in a specified IEEE 802.3ad LAG bundle.
To display the QoS configuration for a specific LAG bundle:
Action
host1#show interfaces lag lg0 members
Lag lg0 is Up, Administrative status is Up
MAC Address is 0090.1a40.01be
MTU: Operational 1526
Duplex Mode: Operational Full Duplex
Speed: Operational 100 Mbps
System Priority 32768 System MAC Address is 0090.1a00.00e0 key 8
Partner System Priority 0 System MAC Address is 0000.0000.0000 key 0
QoS parameter: vlan 1500000
Attached QoS profile: eth1
Member-interface FastEthernet11/2 is Up
(LACP disabled, state collecting/distributing)
Member-interface FastEthernet11/3 is Down
(LACP disabled, state waiting)
Member-interface FastEthernet11/4 is Up
(LACP disabled, state collecting/distributing)
Table 52 on page 349 lists the related show interfaces lag memberscommand output
Meaning
fields.

Table 52: show interfaces lag members Output Fields

Related Topics
Field Name
Lag
QoS parameter
Attached QoS profile
Configuring the Scheduler Hierarchy for Hashed Load Balancing in 802.3ad Link
Aggregation Groups on page 191
Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad
Link Aggregation Groups on page 192
Creating Parameter Instances
For more information about other fields displayed with this command, see the
JUNOSe Physical Layer Configuration Guide
show interfaces lag members
Monitoring the QoS Configuration of IEEE 802.3ad Link Aggregation Group Bundles
Chapter 31: Monitoring QoS on E Series Routers
Field Description
Name of the LAG bundle
QoS parameter instance at the displayed interface
QoS profile attachment at the displayed interface
349

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents