Monitoring Configured Tunnel Groups With Aaa; Table 81: Show Aaa Tunnel-Group Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
Related Topics

Monitoring Configured Tunnel Groups with AAA

Display the currently configured tunnel groups.
Purpose
To display information about currently configured tunnel groups:
Action
host1#show aaa tunnel-group
Tunnel Group: boston
Tunnel
------
3
Tunnel
------
3
Tunnel
------
3
Table 81 on page 430 lists the show aaa tunnel-group command output fields.
Meaning

Table 81: show aaa tunnel-group Output Fields

430
Monitoring Configured Tunnel Groups with AAA
show aaa domain-map
Tunnel
Tag Tunnel Peer Source
----------- ------
192.168.1.1 <null>
Tunnel
Tunnel Server
Tag Client Name Name
----------- ------
msn.del.com <null>
Tunnel Tunnel
Virtual Failover
Tag Router Resync
------- --------
<null> <null>
Field Name
Domain
router-name
router-mask
tunnel-group
ipv6-router-name
local-interface
ipv6-local-interface
poolname
IP hint
Tunnel Tunnel Tunnel
Type Medium Password
------ ------ --------
l2tp ipv4 msn
Tunnel
Tunnel Max
Preference Sessions
---------- --------
2000 0
Tunnel
Tunnel Tx
Switch Speed
Profile Method
--------- ------
sanjose qos
Field Description
Name of the domain
Virtual router to which user domain name is mapped
IPv4 mask of the local interface
Name of the tunnel group assigned to the domain
map
IPv6 virtual router to which user domain name is
mapped
Interface information to use on the local (E Series)
side of the subscriber's interface
IPv6 interface information to use on the local (E
Series) side of the subscriber's interface
Local address pool from which the router allocates
addresses for this domain
IP hint is enabled
Tunnel Id
-----------
<null>
Tunnel RWS
--------------
4