Show Isis Adjacency; Table 262: Show Isis Adjacency Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show isis adjacency

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 262: show isis adjacency Output Fields

Field Name Field Description
Interface through which the neighbor is reachable.
Interface
System identifier (
System
Copyright © 2010, Juniper Networks, Inc.
show isis adjacency
<brief | detail | extensive>
<instance instance-name>
<logical-system (all | logical-system-name)>
show isis adjacency
<brief | detail | extensive>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about Intermediate System-to-Intermediate System (IS-IS) neighbors.
—Display standard information about IS-IS neighbors for all routing instances.
none
brief | detail | extensive —(Optional) Display the specified level of output.
—(Optional) Display adjacencies for the specified routing instance.
instance instance-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear isis adjacency on page 2024
show isis adjacency on page 2097
show isis adjacency brief on page 2097
show isis adjacency detail on page 2097
show isis adjacency extensive on page 2098
Table 262 on page 2095 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
), displayed as a name, if possible.
sysid
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show isis adjacency
command.
Level of Output
All levels
brief
2095