Aaa Authentication Enable Default - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

aaa authentication enable default

aaa authentication enable default authenticator [ authenticator ]*
Syntax
no aaa authentication enable default
Command introduced before JUNOSe Release 7.1.0.
Release Information
Allows privilege determination to be authenticated through the authenticator(s) you
Description
specify. This authentication is applied to vty users. The no version removes the
authentication settings.
Options
Global Configuration
Mode
authenticator Authentication method:
enable Use the enable password
line Use the line password
none Use no authentication
radius Use RADIUS authentication
tacacs+ Use TACACS+ authentication
* Indicates that one or more parameters can be repeated multiple times
in a list in the command line
Chapter 2: A Commands
aaa authentication enable default
35