Color-Mark-Profile - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

color-mark-profile

[ no ] [ ip | ipv6 | mpls ] color-mark-profile profileName
Syntax
Command introduced in JUNOSe Release 7.2.0.
Release Information
Translates the packet color (independent of its type) to a type-dependent mark (for
Description
ToS or EXP), which is applied to a packet after it has exited a rate-limit hierarchy. If
translation is not configured for a color, then packets of that color are not changed.
The no version deletes the color-mark profile.
Options
Color Mark Profile Configuration, Global Configuration
Mode
Related Topics
442
color-mark-profile
profileName Name of the rate-limit profile to be used in a policy (up to 40
alphanumeric characters)
Hierarchical Rate Limits Overview
Policy Rule Precedence