Monitoring Color-Mark Profiles; Monitoring Control Plane Policer Information; Table 33: Show Color-Mark-Profile Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Related
Documentation

Monitoring Color-Mark Profiles

Purpose
Action
Meaning
Related
Documentation

Monitoring Control Plane Policer Information

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 32: show classifier-list Output Fields (continued)
Field Name
Destination Route Class
Source Route Class
Local
show classifier-list
Display information about color-mark profiles.
To display information about color-mark profiles:
host1#show color-mark-profile A
IP Color-Mark-Profile: A
Mask:
Green mark:
Yellow mark:
Red mark:
Table 33 on page 179 lists the show color-mark-profilecommand output fields

Table 33: show color-mark-profile Output Fields

Field Name
Color-Mark-Profile
filter
show color-mark-profile
Display information about control plane policer for a specified protocol or all protocols.
To display information about control plane policer:
host1#show control-plane policer protocol
Burst
Chapter 9: Monitoring Policy Management
Field Description
Route class used to classify packets based on
the packet's destination address
Route class used to classify packets based on
the packet's source address
If true, matches packets destined to a local
interface; if false, matches packets that are
traversing the router
Color Mark Profile Table
----- ---- ------- -----
255
64
-
8
Field Description
Name of the color mark profile
Filter policy action
179